Can I adjust a helmet’s fit?Updated a year ago
Yes you can, all of our helmets will come with spare pads and/or customisable fit wheels for you to refine the helmet’s fit. Please see our tip below:
For Totalities, Slam Caps, and Luminaries:
The fit wheel on the back of the helmet should be able to customize the size for most users, but for those that want to take their customization a step further, flip the helmet over so you are looking inside the back of the helmet. Follow the plastic arms of the fit wheel to where the system clips into the back center or on the sides of the helmet. From these points you can unbutton the wheel and move the it up/down or backwards/forward based on your preference. Buttoning the the wheel higher generally moves the helmet further back on the head to accommodate larger goggles. Buttoning the wheel lower helps to fitting smaller goggles.
Some helmets will also come with spare thick and thin liner padding to loosen or tighten the fit. Just replace the corresponding pads with each other by simply pulling and detaching the velcro anchor points. To switch out the forehead and back-of-the-head pads just pull and replace them. The forehead pad should have the temple flanges facing downwards. To switch out the top pad, just pull and replace. The end with the longer flange should be pointing to the forehead.
Each Basher will come with a custom fit kit, containing the following:
- X1 left & x1 right thick earpad
- X1 Thick forehead pad
- X1 Thick pad for the back of the head
- X1 Thick pad for the top of the head
The helmet will come preset with thin pads inside.
To switch out the earpads, just pull the ear out and replace it with its corresponding piece, The longer edge of the pad goes towards the back of the helmet.
To switch out the forehead and back-of-the-head pads just simply pull them and replace them. The forehead pad should have the temple flanges facing downwards.
To switch out the top pad, just pull and replace. The end with the longer flange should be pointing to the forehead.
For Brain Box:
Each Brain Box will come with a custom fit kit, containing the following:
X1 left & x1 right thick earpad
X1 Thick padding
The helmet will come preset with thin pads inside.
To switch out the earpads, just pull the ear out and replace it with its corresponding piece, The longer edge of the pad goes towards the back of the helmet.
To switch out the main pad, just pull and replace.