How do I replace my lens?Updated 5 months ago

For Simplify Goggles:

1. Replacing the Lens:
  - Make sure your hands are clean. Hold the goggle with your pointer fingers on the frame sides and your thumbs on the front of the lens. Push down and forward until you hear a click.
  - Repeat on the opposite side. Ensure both sides click into place.
  - Finally, squeeze the goggles from the front to ensure the lens is properly seated.

For All Other Goggles: 

1. Removing the Lens
  - Make sure your hands are clean. Gently pull the bottom of the frame, where it rests on the nose, away from the lens. The frame features rounded cutouts that fit into notches on the lens, similar to puzzle pieces. You might hear a pop as the lens detaches this is normal. Continue by releasing the sides and top of the frame until the lens is completely free.

2. Inserting the New Lens
  - Ensure all protective films are removed from the new lens.
  - Align the nose of the lens with the nose of the frame and insert the lens into the nose channel first. The lens should click into place with the frame's cutouts. Proceed by inserting the lens into the side channels, followed by the top. 

It’s useful to have a goggle bag or cloth handy for a final polish. Avoid using gloves or rough materials, as they can scratch the lens.
 
Heads Up: avoid touching the inner lens to protect the anti-fog treatment. We recommend covering the inner lens with the SHRED. microfiber bag during replacement.

If you have any additional questions, just write to us at [email protected]